Skip to main content

Side Projects: Kite Brooch, Mokume Ring, and Emergency Ducal Kit

While I was working on Galen's Coronet and my dirty dozen entry, I knocked out a heraldic kite brooch for myself I've been wanting to do for a while and a mokume-style ring... well, because it was there. I also had a last minute request come in for some strawberry leaves.

Not as many pictures here as usual, since I was just making stuff (and panicking to get projects done), not planning a blog post.

Brooch

A kite brooch is basically a pin with a diamond flap on a hinge. The pin goes in the cloth, a string attached to one side of the brooch comes down, under where the pin exits the fabric and is secured on the other side to hold the brooch in place, and the decorative "kite" swings down over the whole thing to make it pretty. I made this to replace the really basic penannular brooch I was using to secure my brat with something fancier.

The brooch is two layers; a solid backing with the border and fox sawed out then soldered in place on top.

This project gave me a chance to play with the Colores resin (or "cold enamel") kit I got a while back. The color I used is the sapphire from their gem tones. I did not realize it was going to be that transparent, or I would have cleaned up the patina where I was putting the "socks" on the fox. Lesson learned.

There was some really basic engraving attempted to add detail, but I had no idea what I was doing so they're really more like scratches.

Mokume Ring

While I was waiting on the coronet to get out of the pickle one time, I spotted some scrap stranded copper electrical wire I used to wire up a heater in my garage for the winter. That became this, a pseudo-mokume ring. I say pseudo because I cheated by soldering together wire instead of the traditional way of forging together sheets of metal and flattening them. This shares more similarities with cable damascus which you might see in blacksmithing, where stranded steel cable is forge welded together to create a damascus pattern.

To form the band, the stranded wire was twisted, fluxed, then packed with solder. Once it was fused, it got a few passes through the rolling mill to flatten it out. After that, I soldered a basic bezel on and set one of the spare labradorite cabs I had around from Konstantia's coronet. To finish it, I used a chemical mix called Baldwin's patina to make the pattern stand out. This blend will patina most copper based metals (copper, brass, and bronze) but not silver or nickel silver. 

Emergency Ducal Kit


From what I understand, His soon-to-be-Grace Damien had a ducal coronet on order but found out it would not be ready in time for when he stepped down at coronation. So, I threw together some strawberry leaves that could be crimped on to his existing County coronet to make it more Duke-ish.

This was just some quick sawing out of 22 gauge brass, engraved with a ball burr in a flex shaft (because I suck at push engraving), and wires soldered on the back. I was told they could be really ugly as long as they got the message across, but I have some standards.

Comments

Post a Comment

Popular posts from this blog

Fox Masquerade Mask

I've had the idea of making a metal fox mask for a few years now, but haven't really had a reason to do it until this year. Work decided our holiday party would be a murder mystery masquerade, which makes a great excuse.

The basis for the mask was Wintercroft's Fox Half Mask. The half mask is perfect for the masquerade use, and I thought the papercraft/low poly look would translate well to the metal.
I took the mask template and glued it to 22 gauge copper sheet with spray adhesive.
Then after about an hour of work with a jeweler's saw... I had the pieces, somewhat resembling a fox mask, but mostly a Batman logo.
The paper templates were attached to the other side, so I could use the dotted lines for initial bends. These were mostly done on the corner of an anvil or over a piece of 1"x4" clamped in a bench vice. A rubber mallet was used instead of a metal hammer, since the rubber won't leave indentions in the surface where the hammer strikes.
After the i…

Making Metal Purple: Enamel and Patinas

One problem I ran into with my award medallion project is how to make metal purple. Because Calontir likes purple. A lot. After digging around, I came up with four possible plans:
EnamelPatinaDye-oxideDyed epoxy Enamel This was my first choice, as it both looks pretty and fits into the time period of the SCA. After some modifications to my soldering station and a promising test on scrap copper, I took one of my newly cast Golden Swan medallions and went to work.

A layer of enamel was applied and things looked good. The medallion was set aside to cool. While I was cleaning up other parts of the shop, I started hearing a faint little "Ting! Ting!" coming from the soldering tray. All of the beautiful enamel was popping off! Which lead to the first lesson from this project: coefficient of thermal expansion.
Most of the enamels you see for sale are "medium temperature medium expansion". These are designed with copper, gold, and silver in mind. Since the brass I was tryi…

Konstantia's Coronet

At Fall Crown Tourney, Konstantia was made a baron of TRM Damien and Issabell's court. I had the pleasure of making her coronet. I also managed to not spend the last three months with my fingers steepled while cackling maniacally.
Design There was a moment of worry at the start of this because I said I would be interested in doing a coronet before I knew who it was for. When I heard it was for Konstantia, I knew that meant Byzantine. Which means bling. Lots of bling. I had actually made a comment to Jakob before about Byzantine style looking like a pain to make because of the amount of bling. But, it was a good challenge.
My initial research into styling for a Byzantine coronet turned up two basic design concepts I worked off of (citation needed, since it appears I didn't save these sources): Stones were more important than the gold. The Byzantine empire was full of gold mines, while precious stones were imported. So, the focus was on the stonework while the metal itself was m…